Prestige Prestige Solo 175 Installation And Maintenance Manual Download

Page: 56 / 105

TriMax Operation

CH/DHW Operation

Heating Enabled

Navigation: Home Screen>Main Menu>CH / DHW Operation

CH / DHW Operation provides a simple way to disable either the central

heating or domestic hot water functions of the Prestige. Operation can be

enabled and disabled by selecting the central heating or domestic hot water

icon then pressing the

button to toggle between enabled and disabled.

An icon with an X through it indicates that function has been disabled. The

disabled icon is also displayed on the home screen when a function has

been disabled.

Navigation: Home Screen>Main Menu>Boiler Information>Boiler

Information

Boiler Information provides real time operating information of the

Prestige. Each line contains an information item followed by its current

value. Six information items are displayed on the screen at one time. Press

the

DOWN

buttons to scroll through additional information items.

See page 51 for a list of all information items.

Boiler Information Logging

Some information items include a logging function which records one sam-

ple every 12 minutes to produce a graph of the last 24 hours. Select the infor-

mation item in Boiler Information then press the

button to view its

graph. The following items have a logging function:
• Boiler Firing Rate

• Flame Ionization Current

• Boiler Setpoint

• Boiler Supply Temperature

• Boiler Return Temperature

• Boiler Flue Temperature

• Outdoor Temperature

• DHW Storage Temperature

• External Modulation Signal

Boiler Information

Boiler Information

Boiler Status

Heating Call

DHW Call

Boiler Firing Rate

Flame Ionization Current

Boiler Setpoint

Standby

OuA

Boiler Status

Standby

194

-24.00

-16.00

-8.00

0.00

Boiler Setpoint

Summary of Contents for Prestige Solo 175










































































































Search results

Summary of Contents for Prestige Solo 175

Reviews:

Related manuals for Prestige Solo 175

Brands by name

Popular brands

Prestige Prestige Solo 175, Installation And Maintenance Manual

Search results

Summary of Contents for Prestige Solo 175

Reviews:

Related manuals for Prestige Solo 175

Brands by name

Popular brands