20
Fig. 8.1
S
F
C
BURNERS
They can be removed and washed with
soapy water only.
They will remain always perfect if
cleaned with products used for silver-
ware.
After cleaning or wash, check that burn-
er-caps and burner-heads are dry
before placing them in the
respective
housings
.
It is very important to check that the
burner flame distributor and the cap has
been correctly positioned - failure to do
so can cause serious problems.
CORRECT REPLACEMENT OF THE
BURNERS
It is very important to check that the
burner flame distributor F and the cap C
has been correctly positioned (see figs.
8.1 - 8.2) - failure to do so can cause a
poor burner flame and/or damage to the
burner and hob.
Check that the electrode “
S
” (fig. 8.1) is
always clean to ensure trouble-free
sparking.
Note: To avoid damage to the electric
ignition do not use it when the burn-
ers are not in place.
Fig. 8.2
GAS TAPS
In the event of operating faults in the gas
taps, call the After Sales Service
Department.
Summary of Contents for PR1-D60
Page 34: ...34 ...
