Page 13 of 19
4
Controller
The N-Gen nitrogen generator can be controlled by a Multi-F controller or a N-Gen controller.
4.1
Multi-F Controller
The JGA 944B Multi-F controller is the is the motherboard that controls the N-Gen nitrogen generator. It processes the incoming
start and stop signals and thereby generates the correct output signals.
Figure 5. JGA 944B Multi-F controller
4.2
N-Gen Controller
The N-Gen Control is the control board for measuring and controlling. A N-Gen nitrogen generator consists of one or more N-Gen
Controls. For the N-Gen Control two hardware versions can be used: the JGA2000 and the JGA2024. These boards are fully
compatible except for the expansion connector which is only present on the JGA2000.
Figure 6. JGA 2024B-1 N-Gen controller
4.2.1
Display 1085
The operation of the N-Gen control can be done by means of a JGA1085. This board has a display on the front. At the back of the
display the intelligence board is mounted. On the display the status of the system is shown and the settings can be made.
Figure 7. JGA 2024B-1 N-Gen controller
Summary of Contents for N-Gen
Page 2: ...Page 2 of 19...
