3
Controlling StudioLive RM-series Mixers
3.2
Basic Channel Operation
StudioLive
™
CS18AI
Owner’s Manual
32
When a channel is selected, the following controls are available:
• Preamp functions
• Fat Channel Processing with A/B
• Stereo Linking
• Main and Subgroup Assignments
• Level and Gain Reduction Metering (Compressor and Gate)
• Pan control
• Input Source Selection
• Custom Naming
• Color Code Selection
Note:
Fat Channel processing is disabled on all output buses on RM-series
mixers when HD Mode (88.2 and 96 kHz) is active. AVB Networked audio on
both the CS18AI and RM-series mixers is also disabled in this mode
When editing Fat Channel settings with these controls,
the settings values are displayed in two ways:
• In the Fat Channel meter mode, the meter above
each parameter indicates its value.
• When a control is adjusted, the exact value is displayed
in the upper right corner of the touchscreen.
3.2.1
Input
3
1
2
4
The Input section contains the settings for preamp gain, highpass
filter (HPF), +48V phantom power, and polarity.
1. Preamp. Adjusts the gain of the channel’s analog input.
Power User Tip:
The preamp level for the 16 currently visible channels
can be adjusted simultaneously using Preamp Mode from the
Home screen. Please
see Section 3.7
for more information.
2. High Pass Filter. Sets the High Pass Filter frequency threshold for
the selected channel or output bus. Frequency range is indicated to
the left of the meter. The filter’s threshold can be set from 24 Hz to
1 kHz. When the meter is set to its lowest point, the filter is off.
Summary of Contents for StudioLive CS18AI
Page 4: ......
