2
Getting Started
2.4
Step 4: Connecting the CS18AI Networked Audio
StudioLive
™
CS18AI
Owner’s Manual
21
Monitor Outputs
The monitor outputs are balanced XLR-M jacks and are convenient for
control room monitoring when the CS18AI is used to control Studio
One or for monitoring in broadcast applications. The signal routed to
these outputs is the same as what is sent to headphone outputs.
• To control the level of the Monitor outputs, adjust the Monitor
knob in the Monitor area of the CS18AI’s front panel.
Selecting a Headphone/Monitor Source
The phones jack and monitor outputs on the CS18AI carry the same source.
To select a monitor source:
• Press the Solo button in the Monitor area to select the Solo bus as the source.
• Press the Main button in the Monitor area to select the main mix as the source.
• Press the Cue button in the Monitor area to select the cue source.
To set the cue source:
• Press the Edit button in the Monitor area to open the Monitor Cue Routing page.
• Touch the source you want to monitor.
Summary of Contents for StudioLive CS18AI
Page 4: ......
