2
Getting Started
2.4
Step 4: Connecting the CS18AI Networked Audio
StudioLive
™
CS18AI
Owner’s Manual
20
+48V Phantom Power
The +48V phantom power can be individually enabled for each mic input.
Power User Tip:
Phantom power is a system for powering condenser
microphones, DI boxes, and other devices by supplying a DC voltage
over a mic cable. The StudioLive CS18AI controller su48V,
which is the most commonly used phantom power voltage.
Note:
Always be sure that phantom power is disabled for an
input before plugging or unplugging a microphone.
Connecting Line-Level Sources to the Combo Jacks
Line-level sources can be connected to the combo jacks instead of microphones. The
line inputs bypass the preamps, going directly to the analog-to-digital converters.
Connecting Line-Level Sources to the TRS Jacks
The CS18AI rear panel includes two TRS Line Input jacks. These jacks provide
additional line inputs for sources from front-of-house, such as 2-track or
computer playback. On a StudioLive RM-series mixer connected to the
CS18AI via AVB, these two inputs show up as digital returns 33 and 34.
2.4.2
Headphone and Monitor Outputs
Headphone Output
A ¼-inch stereo headphone jack is located on the front right
corner of the CS18AI front panel, just under the armrest.
• To control the level of the Phones output, adjust the Phones
knob in the Monitor area of the CS18AI’s front panel.
Summary of Contents for StudioLive CS18AI
Page 4: ......
