6
6.2
Logic (MCU)
Channel Strip
ioStation24cAudioInterfaceandProductionControllers
Owner’s Manual
6.3
Transport Controls
传输控制
6.2
Channel Strip
1.
Arm.
Pressingthe Arm button will allow you to arm the
currentlyselected track forrecording.Presswith SHIFT to
arm all tracks for recording
.
2.
Mute.
Mutesthecorrespondingchannel’soutputsignal.
Presswith SHIFT for Mute Clear.
3.
Solo.
Isolatesthecorrespondingchannel’soutputsignal
in the mix. Presswith SHIFT forSolo Clear.
4.
Bypass / Bypass All.
Press to Show/Hide the Detail View.
5.
Touch-Sensitive Fader.
This 100 mm motorized fader
canbeusedtocontrolvolumelevelsandpanninginPan
Flip mode.
See Section 6.4 for details
.
1.
配备。按
"Arm"
按钮，可以配备当前选定的轨道进行
录音。按下
SHIFT
键，可以将所有的音轨配备起来进行
录音。
2.Mute
（静音）。将相应通道的输出信号静音。按
SHIFT
键，可以清除静音。
3.
独奏。在混音中隔离相应通道的输出信号。按
SHIFT
键可以清除独奏。
4.Bypass / Bypass All
旁通
.
按下显示
/
隐藏细节视图。
5.
触摸感应推进器。这个
100
毫米的电动推进器可以用
来控制音量大小和翻转模式下的平移。详见第
6.4
节。
1
2
3
4
5
6
1.
Stop.
Stops playback. Press again to return to zero.
2.
Loop.
Engages / disengages cycle/loop playback.
Press and hold the Loop and Rewind button
simultaneously to set the cycle start point at the current
timeline position.
Pressand hold the Loop and FastForward buttons
simultaneously to set the cycle end point at the current
timeline position.
4
3
2
1
5
