6
6.1
Logic (MCU)
Getting Started
ioStation24cAudioInterfaceandProductionControllers
Owner’s Manual
6.1
Getting Started
开始工作
6
Logic (MCU)
Bydefault,theioStation24cisinStudioOneoperationmode.Toswitchto
Logicoperation,pressandholdtheNEXTbuttonwhilepoweringonyour
ioStation 24c, then press the Mute button to enable Logic (MCU) operation.
Once you have connected your ioStation 24c to your computer, launch Logic.
The ioStation 24c will auto-configure as a Mackie ControlUniversal device.If
forsomereasonthisdoesnothappen,youwillneedtoenableitmanually.
默认情况下，
ioStation 24c
处于
Studio One
操作模式。要切换到逻辑操
作，请在开机时按住
NEXT
按钮，然后按静音按钮启用逻辑（
MCU
）操
作。
一旦您将
ioStation 24c
连接到您的电脑，
Logic
会启动。
ioStation 24c
将自
动配置为
Mackie Control Universal
设备。如果由于某些原因没有配置成
功，您需要手动启用它。
1. If you do not have Advanced preferences enabled, go
to LogicPro| Preferences| AdvancedTools…
如果您没有启用
Advanced preferences
，请进入
Logic Pro | Preferences |
Advanced Tools...
2. Enable“Show AdvancedTools.”
启用
"
显示高级工具
"
。
Logic(MCU)
