25
5
5.2
Aggregating Devices
Windows
Quantum 2626
Owner’sManual
3. Select the Quantum interface you would like to use for the next bank of
channels. Set the Aggregation Order to “2” and the Clock Source to
Wordclock.
选择你想用于下一组通道的
Quantum
接口。将聚合顺序设置为
"2"
，
将
“Clock Source”
设置为
“Wordclock”
。
4. If you are connecting three or four Quantum interfaces, you will repeat
step 3 and set the Aggregation Order to 3 and 4 respectively.
如果你要连接三个或四个
Quantum
接口，你将重复步骤
3
，并将
聚合顺序分别设置为
3
和
4
。
Your Quantum system is now ready to use. Note that if you’re only aggregating
two Quantum-series interfaces, and your computer has two Thunderbolt
ports, you can simply connect both of your Quantum-series interfaces
directly to the computer rather than connecting them to each other.
现在你的
Quantum
系统可以使用了。请注意，如果你只聚合两个
Quantum
系列接口，而你的计算机有两个
Thunderbolt
端口，你可
以简单地将两个
Quantum
系列接口直接连接到计算机上，而不是
将它们相互连接。
