PRESONUS FIRESTUDIO MOBILE - SCHEMA, User Manual

Page: 36 / 51

CONTROLS AND CONNECTIONS
34
| PreSonus 2008
3.3.2 Mix Routing to Outputs
In addition to being able to patch any input to any output, you can also assign up to 9 different stereo mixes
to any pair of outputs as well as assign your main outputs and headphone outputs to mimic a physical output.

Mix Source button
Clicking on the Mix Source button above the desired pair of outputs will
allow you to assign any one of the 9 stereo monitor mixes the FireStudio
Control Console allows you to create on the Mixer tab.
The Mix Source buttons are visible regardless of which router tab is currently
active. When you have assigned a monitor mix to a pair of outputs, the
button will show the name of that mix.

Router Presets
The FireStudio Control Console allows you to save six router presets. To
save a routing scheme, simply click “Save” and then one of the preset
numbers. To recall a preset, simply click on the number.
The Default button resets the Router matrix so that each playback stream is
routed to its own output.

Main Assign section
The Main L/R outputs as well as each of the headphone outputs can be
assigned to mimic any physical output.
To assign one of these monitor outputs, click on its button. It will turn blue.
Mouse over to the output you wish to mimic, you will see a volume
potetiometer appear over the output. Left click this image to audition the
output. Double left-click it to assign. Click on the monitor output button
again to lock your selection.
Please note: The MSR must be connected for Phones 2 and 3 to be
accessible.

Main Assign LEDs
Once you have assigned the Main or headphone outputs to a particular output
pair, an LED will light up above those faders indicating an assignment has
been locked.

MO:
Main Output

P1:
Phones 1

P2:
Phones 2

P3:
Phones 3