14
3
Connecting to a Computer
AudioBox USB®96
4. Click the “OK” button.
点击“确定”按钮。
5. Restart Sonar.
重启
Sonar
6. Go to Options | Audio... and click on the Drivers tab.
转到选项|音频…并单击Drivers选项卡。
7. Highlight all input and output drivers beginning with “PreSonus AudioBox USB96.”
突出所有以“PreSonus AudioBox USB96”开头的输入和输出驱动程序。
8. Go to Options | Audio... and click on the General tab.
转到选项|音频…并单击General选项卡。
9. Set the Playback Timing Master to “PreSonus AudioBox USB96... DAW Out 1.”
设置播放定时主程序为 “PreSonus AudioBox USB96…DAW Out 1”
10. Set the Recording Timing Master to “PreSonus AudioBox USB96... Mic/Inst 1.”
设置录音定时主机为 “PreSonus AudioBox USB96… Mic/Inst 1”
Cubase
1. Launch Cubase.
启动 Cubase
2. Go to Devices | Device Setup.
进入设备|设备设置
3. Select “VST Audio System” from the Devices column in the Device Setup.
在“设备设置”的“设备”列中选择“VST音频系统”。
4. Select PreSonus AudioBox USB96 from the ASIO Driver dropdown list.
在“ASIO驱动”下拉列表中选择“PreSonus AudioBox USB96”
5. Click “Switch” to begin using the AudioBox USB96 driver.
点击 “Switch” 开始使用 AudioBox USB96 驱动程序。
6. Once you have successfully changed the driver, go to Devices | VST Connections
to enable your input and output buses.
成功更改驱动程序后，转到Devices | VST Connections以启用输入和输出总线。
