46
-
Sensitivity
“
”
: allows the adjustment of the microphone
(original one or optional vox) for an optimum transmission quality.
Adjustable level from
1
(high level) to
9
(low level).Default value:
2
.
-
Anti-Vox
“
”
: allows disabling the transmission generated
by the surrounding noise. The level is adjustable.
OF
(according
the squelch level) and from
0
(without anti-vox) to
9
(low level).
Default value:
Of
.
-
Delay
time
“
” : allows avoiding the sudden cut of the trans-
mission by adding a delay at the end of speaking. The level is
adjustable from 1 (short delay) to 9 (long delay). Default value:
1
.
The
V
ox Adjustment
does not automatically active the
VOX
function.
See the §
VOX
on page 46
to
activate
/
deactivate
the
VOX
function
.
8) EMG
An emergency channel is automatically selected when
by pressing
EMG
Key (
8
). First short press to
call
the first
emergency customisable channel.
“
”
appears
on the display. Second short press to
call
the second
emergency customisable channel.
“
”
appears on
the display. Third short press to
go back
to the current
channel.
“EMG...”
disappears on the display.
See then Table page 74 for default emergency chan-
nels.
Consult the menu
EMG SETTING
page 48.
7 + 8) KEY LOCK
(long simultaneous press)
Press and hold simultaneously the
VOX
key (
7
) and the
EMG
key (
8
) to
lock
/
unlock
then unit.
“
”
appears on
the display when the function is activated.
Note:
The
PTT
switch (
11
) remains enable while the unit is
locked.
9) USB CHARGING SOCKET
The
USB
socket (
9
) can be used to
charge
a smartphone,
tablet or other rechargeable device with 5 V - 2.1 A.
10) 6 PIN MICROPHONE PLUG
The plug is located on the front panel of the transceiver
and makes the setting of the equipment into the dash-
board easier. The BILL II accepts electret or dynamic
microphone
(see menu
MIC TYPE
on page 49)
.
See cabling diagram page 70.
11) PTT (Push To Talk)
Transmission key, press
PTT
switch to
transmit
a message,
is displayed and release to
listen
to an incoming
communication.
TOT (Time Out Timer)
If the
PTT
switch (
11
) key is pressed for more than 3 minutes,
the display starts blinking and the transmission ends.
A beep will sound until the
PTT
switch (
11
) key is released.
C) FUNCTION WITH THE PTT SWITCH
1) VOX
Press and hold then
PTT
switch (
11
) and then press the
VOX
key (
7
) to
activate
/
deactivate
the
VOX
function.
“VOX”
appears on the display when the function is on.
English
