45
5) F - FREQUENCY BAND SELECTION
See §
FUNCTIONS TURNING ON THE UNIT
page 47.
6) ANL/NB ~ HI-CUT ~ SKIP
ANL/NB
(short press)
A short press on the
ANL/NB
key (
6
) allows you to
activate
the following settings: no filter (default) /
ANL
activated
/
ANL
and
NB
activated.
The icon of the active filter appears on the display.
Warning:
ANL
filter works only in
AM
mode
HI-CUT
(long press)
A long press on the
HI-CUT
key (
6
)
activate
/
deactivate
(defaults) the
HI-CUT
filter. When the filter is activated
“HI-CUT”
appears on the display.
HI-CUT:
Cuts out the high frequency interferences and has
to be used in accordance with the reception conditions.
When active, the filter is displayed on display.
SKIP
(long press only if the
SCAN
function is activated)
This function allows you to
skip
a channel found by the
SCAN
function. When the scan stops on an unwanted
channel, press and hold the
ANL/NB
key (
6
) for 1 second
to
store
this channel in the
SCAN SKIP memory
. A beep
sounds. The channel will no longer be scanned.
See the
§
SCAN
page 44.
Consult the
SCAN SKIP
menu page 49
.
7) AM/FM ~ VOX SET
AM/FM
(short press)
The
AM/FM
key (
7
) allows you to
select
the modulation
mode
AM
or
FM
. Your modulation mode has to corre-
spond to the one of your correspondent. Selected mode
is displayed on the LCD.
Amplitude Modulation / AM:
communication on a field
with relief and obstacles at middle distance (the most
used).
Frequency Modulation / FM:
for nearby communications
on a flat open field.
In U configuration ONLY:
press
AM/FM
key (
7
) to alter-
nate the frequency band between
ENG
and
CEPT
.
“UK”
appears in the display when the
ENG
band is selected.
“UK”
disappears on the display when
CEPT
is selected
(see table at page 71).
VOX SET
(long press)
Three parameters allow to
adjust
the
VOX
function:
Sensitivity:
/ Anti-vox level:
/ Vox delay time:
.
Long press the
VOX
key (
7
) to
enter
in the
VOX Adjustment
function. The message show the current parameter :
,
or
.
1.
Press then
VOX
key (
7
) to
select
the next parameter or...
2.
Press the
UP
/
DN
key on the microphone or the
s
/
t
key
(
3
) on the unit to
change
the value of the parameter.
3.
Once the settings done, press the
PTT
switch (
11
) to
save
and
exit
the
VOX Adjustment
mode. If no adjustment
is made for 5 seconds, the unit automatically
exits
the
mode without saving.
English
