PRESIDENT Bill II, Owner'S Manual

Page: 49 / 76

49
microphone (
3
) to
select
(the “2” blinks).
5. Press the AM/FM key ( 7 ) to validate or . The
channel blinks on the display.
6.
Use
s
/
t
key (
3
) on the unit or
UP
/
DN
key (
3
) on the
microphone to select the channel .
7.
Press the
AM/FM
key (
7
) to
validate
the channel. The
modulation mode (AM or FM) blinks on the display.
8. Use
s
/
t
key ( 3 ) on the unit or UP / DN key ( 3 ) on the
microphone to
select
the
modulation mode
.
9. Press the AM/FM key ( 7 ) to confirm and select another
menu or press the
PTT
switch (
11
) to
confirm
and
exit
.
10. The unit automatically exits the menu after 10 seconds.
See the §
EMG
page 46
See then Table page 74 for default emergency chan-
nels.
5) MIC TYPE
The BILL II accepts 6-pin PRESIDENT electret or dynamic
microphone.
1. Turn off the unit.
2.
Turn on the radio while pressing the
AM/FM
key (
7
). is
displayed.
3.
Use
s
/
t
key (
3
) on the unit or
UP
/
DN
buttons on the
microphone (
3
) to
select
the menu.
4. Press the AM/FM key ( 7 ) to validate .
5.
Use
s
/
t
key (
3
) on the unit or
UP
/
DN
key (
3
) on the
microphone to alternate between
EL
(electret) or
dY
(Dynamic).
6.
Press the
AM/FM
key (
7
) to
confirm
and
select
another
menu or press the PTT switch ( 11 ) to confirm and exit .
7.
The unit automatically
exits
the menu after 10 seconds.
Note:
On power up, in order to inform the user, the pro-
grammed microphone type is displayed for 2 seconds
(see § ON/OFF page 43) .
The default type of microphone is
EL
.
6) ACCESSORY VOLUME
This function allows you to control the volume of the unit
and an accessory plugged on the 6-pin plug (accessory
available soon).
1. Turn off the unit.
2.
Turn on the radio while pressing the
AM/FM
key (
7
). is
displayed.
3.
Use
s
/
t
key (
3
) on the unit or
UP
/
DN
buttons on the
microphone (
3
) to
select
the menu.
4. Press the AM/FM key ( 7 ) to validate .
5.
Use
s
/
t
key (
3
) on the unit or
UP
/
DN
key (
3
) on the
microphone to select
0
,
1
or
2
.
6.
Press the
AM/FM
key (
7
) to
confirm
and
select
another
menu or press the
PTT
switch (
11
) to
confirm
and
exit
.
7. The unit automatically exits the menu after 10 seconds.
0
- the volume knob ( 1 ) affects the internal speaker volume.
1
- the volume knob ( 1 ) affect the accessory volume
2
- the
volume
knob (
1
) affects both the internal speaker
and accessory volume.
Default accessory volume is
0
.
7) SCAN SKIP
This function allows to memorize / erase a channel form
the
SCAN SKIP memory
.
First Select then channel to be set.
English