4
Pre-Installation
PLANNING INSTALLATION
Inspect your unit before proceeding. Check the surface for any flaws or damage, including dents, bends, bumps, or scuff marks. If any damage
is noticed, do not proceed with installation . Please return the unit to place of purchase for an exchange . If there are any missing parts, please
contact the manufacturer for replacements .
You may choose to install this sink either undermount (from below the counter) or topmount (from above the counter) . You must install this sink
only in a counter at least 36 in . (914 mm) wide with a solid surface that has a minimum thickness of at least 3/4 in . (19 mm) .
Protect the entire surface of the product during installation to prevent damage .
TOOLS/MATERIALS REQUIRED
Measuring tape
Carpenter’s square
Wrenches (2)
Saber-saw or
Jig-saw
Electric drill with
3/8 in . (10 mm) drill
bit and 1 in . (25 .4
mm) or 3 in . (76 .2
mm) hole saw
Pipe wrench
Plumber’s putty
Silicone sealant
Pencil
Phillips screwdriver
Hacksaw
Teflon tape
Safety gloves
Safety goggles
PARTS REQUIRED (NOT INLCUDED)
NOTE:
Parts not shown to actual size.
Plastic
flange (1)
Tail pipe (1)
Connecting
nut (1)
Supply lines (2)
