12
Operation
USING THE SLIDING SINK AND COLANDER
A
C
D
1
- The sliding sink (C) and the colander (D) can be
placed in any location along the track (1) in the
sink (A) .
-
The colander (D) fits inside the sliding sink (C) for
easy storage .
USING THE CUTTING BOARD
Side 1: In Sink Track
Side 2: On Counter
E
- The specially designed cutting board (E) can be
placed in the track of the sink (A) . Make sure side 1
faces up, so that liquids drain into the sink through
the handle .
- The cutting board (E) can also be used on the
counter . In this case, side 2 should face up, so that
liquids are caught in the edge trough .
INSTALLING THE BOTTOM GRID
- Ensure that the vanishing edge
TM
strainer basket (F) is already
in the sink (A) before placing the bottom grid (B) .
- The bottom grid (B) must be positioned with its rubber
supports down . Tilt the grid up so it is at a slight angle, slide
it into the sink (A), and place it so that it is sitting flat on the
bottom of the sink .
B
F
A
B
