16
© 2011 PreSens Precision Sensing GmbH
Microx TX3
Operation
4.3 Starting the Device
1.
Connect the Microx TX3 via the supplied USB cable to a serial COM port of your
PC / notebook. (Alternatively, you can connect the Microx TX 3 via the RS232 cable to a
serial COM port of your PC / notebook. Tighten the cable with the screws on your PC /
notebook.)
2.
Connect the power supply.
3.
Please close all other applications as they may interfere with the software. Start the
software TX3v602.
The software is scanning all COM ports available to detect and configure the connected
Microx TX3 device.
Fig. 18
Initial Window - Software is scanning to detect the connected Microx TX3 device