70
© 2013 PreSens Precision Sensing GmbH
Fibox 4 & Fibox 4 trace
Operational Notes
7.
Push the connected cable along the guide rail into the housing.
8.
Now screw the clamping nut to the housing. Use a fitting open-end wrench to hold the
housing (at SW-8; fitting open-end wrenches can be obtained at ODU: SW-8mm ordering
number 598.700.001.000, SW-7mm ordering number 598.700.001.011.000, status
07/2013).
!
Please note the max. turning moment is 60 Ncm.
9.
Push the bend relief over the clamping nut and you have finished attaching the connector
to your temperature sensor. Now it can be used with the Fibox 4 / Fibox 4 trace.
Fig. 95
Fig. 96
Fig. 97
Summary of Contents for Fibox 4 trace
Page 1: ...Fibox 4 Fibox 4 trace Fiber optic oxygen transmitters TRANSMITTERS Instruction Manual...
Page 2: ......
Page 4: ......
Page 7: ......