PreSens Fibox 4 trace, Instruction Manual, Page: 38 / 79

33
© 2013 PreSens Precision Sensing GmbH
Fibox 4 & Fibox 4 trace Operation
4.4.5 Interval
Use the navigation buttons to move to the Interval box and select the measurement mode.
With Single Scan selected one single measurement is taken. Selecting Interval you are able
to set a certain time interval at which measurements are taken (default value is 3 s, fastest
possible is 1 s). Insert the hours, minutes, and seconds for the interval at which you want
measurements to be taken.
4.4.6 Logging & Data Management
Use the navigation buttons to move to the Logging box. Select Off if you do not want to store
measurement data.
: In the status bar this symbol shows that logging is turned off.
Select
On if you want to store measurement data. The screen will switch to the Measurement
Browser automatically. The list shows the Measurement file name, the number of
measurement Points stored in the respective file, and the date the file was Last Used .
Fig. 45 Measurement Settings – select time Interval
Fig. 46 Measurement Settings - Logging