4. Description of functions
Premier Tech
17 / 64
Solido SMART
DOKK5110E 15.04.2020
Plant control unit
The Solido SMART system is equipped with an S40-type electronic controller. The sequence
program is designed in a way that guarantees that the required outflow values are
maintained through the proper adjustment of the parameters.
When you enter the number of inhabitants for the plant, the preset control parameters are
automatically loaded.
If it appears that the plant is underloaded or overloaded, these parameters must be adjusted
according to the actual conditions by a specialist company (upon consultation with the
Premier Tech specialist service if required).
For a detailed description of how the controller works, see chapter “8. S40 control unit and
available settings”.
Holiday economy mode
For longer periods where no wastewater is generated, e.g. holidays, you can select an
economy mode for max. 120 days
.
•
In this case, the aeration time is reduced to 50% of the set value.
After this time, the controller automatically switches back to normal mode.
Consult your service technician and also refer to the menu overview and navigation in
chapter “8. S40 control unit and available settings”.
Operating hour meter and logbook functions
The electronic controller in your plant has an operating hour counter and logbook function.
Consult your service technician and also refer to the menu overview and navigation in
chapter “8. S40 control unit and available settings”.
Float switch
The Solido SMART system is equipped with a sensor (float switch) that is used as an overfill
alarm.
The plant triggers an alarm as soon as the sensor detects that the fill level is too high.
