premierpet.com
7
Tips & Maintenance
Transitioning Your Cat to the Litter Box
Most cats easily adapt to the Auto-Clean
™
Litter Box System. Some cats may require an adjustment period to get
used to their new litter box. Here are a few tips to help with the transition:
1. Place the new Auto-Clean
™
Litter Box next to your cat’s current litter box. Allow your cat to have access to both
the old and new litter boxes for at least a week. This time may vary depending on the temperament of your cat.
2. Stop cleaning your cat’s old litter box, allowing it to remain dirty. Cats prefer a clean litter box, and this will make
the new litter box more appealing. Your cat should start using their new Auto-Clean
™
Litter Box System.
NOTE: Although the Auto-Clean
™
Litter Box System is quiet while running, you may want to leave it unplugged for a few
days so your cat can get used to the new box without any distractions. If you leave it unplugged, you need to manually
scoop waste from the litter box until your cat is fully transitioned.
3. Once your cat has transitioned to the new litter box, just plug it in and remove the old litter box from the area.
Waste Removal
We recommend disposing of any waste at least every other day, or more if you have more than one cat.
Adaptor to
Wall Outlet
9
9. Insert the end of the power adaptor into the power
connection on the back of the litter box. Plug it into a
standard wall outlet. The green light on the litter box
should illuminate. Your litter box is ready for use.
LED Indicator
LIGHT COLOR AND
FUNCTION
WHAT IT MEANS
Solid Green
The unit is fully operational. The
unit works in cycles of 30 minutes
on then 30 minutes off, and the
green light will still illuminate
during the “off” cycles.
Blinking Blue
The waste trap or conveyor cover
are not fully in place.
Solid Red
There is an issue with the
conveyor motor. Unplug the unit
and plug it back in. If the light
turns red again after 10 minutes,
please call our Customer Care
Center at +1 (800) 381-2785.
Blinking Red
There is an issue with the bowl
motor. Unplug the unit and plug it
back in. If the light blinks red again
after 10 minutes, please call our
Customer Care Center at
+1 (800) 381-2785.
Alternating Red
and Blue
There is an issue with both the
conveyor and bowl motors.
Please unplug the unit, and call
our Customer Care Center at
+1 (800) 381-2785.
