6
Customer Care 1 (866) 381-2785
NOTE: The conveyor cover and waste trap must be aligned correctly and fully inserted in the unit to turn on the green
indicator light. The green light must be on to supply power for the litter box to operate properly. If the light is blinking blue,
then either the waste trap or conveyor cover are not in place.
Only use premium clumping, clay cat litter. Using a different type can cause the litter box to malfunction. Maintain the litter
level at the fill line or the litter box may not operate properly.
Do not allow anything to rest on the power cord. Do not plug in power adaptor in an area where people or animals may walk or
trip on cord.
Waste Guide
5
5. Lower the conveyor and tighten the thumb screws,
then flip the waste guide down into place.
6
6. Place one carbon filter into the brackets on the inside
of the conveyor cover. The black side of the filter
should face outward. The carbon filter helps reduce
odors from the waste trap area. Place the conveyor
cover over the conveyor, making sure it is secure.
7
7. Use a plastic bag to line the waste trap. Insert the
waste trap into the back of the litter box, making
sure it is aligned and fully inserted into the unit. For
additional help to minimize odors, add a small layer
of clean litter and baking soda to the plastic waste
bag or waste trap before placing it in the litter box.
Litter Fill Line
8
8. Fill the litter bowl only with clumping, scoopable, clay
cat litter to the maximum litter fill line.
Be sure to
fill the bowl to the fill line, as leaving the box too
empty or too full can cause issues.
