premierpet.com
9
5. Rinse and thoroughly dry all parts before reassembling the unit. If needed, carefully clean the conveyor using only
a damp cloth or sponge.
Do not submerge or expose the electrical components to water or cleaning solutions. DO NOT submerge or
expose the base unit, conveyor or any electrical components to water or cleaning solutions. DO NOT use bleach or
chemicals to clean as they can act as a repellent to your cat.
Always unplug the unit when not in use, before putting on or taking off parts, and before cleaning.
Reassembly
1. Replace the litter bowl with litter guard on the base unit.
2. Follow steps 5-9 in the “Setup Instructions” section (pages 6-7).
NOTE: The conveyor cover and waste trap must be aligned correctly and fully inserted in the unit to turn on the green
indicator light. The green light must be on for the litter box to operate properly. If the light is blinking blue, then either the
waste trap or conveyor cover are not in place.
Only use premium clumping, clay cat litter. Using a different type can cause the litter box to malfunction. Maintain
the litter level at the fill line or the litter box may not operate properly.
3
3. Lift up the litter bowl to remove it, and dispose of the
used litter.
4
4. If further cleaning is needed, remove the litter guard.
The litter bowl, litter guard, and waste trap can be
submerged in water and washed with mild soap.
