Page 8
Installation Instructions
LPFM5080
Step 3.
Next, drill holes using an electric drill
and masonry bit. The drill bit size that is
used will depend on the size of the
hardware
used.
Step 4.
Insert a concrete anchor into each hole.
Step 5.
Use a hammer to lightly tap each anchor
into place so that they are flush with the
wall.
Drill
Step 6.
Once all of the anchors are in place, move
the wall plate back into position.
Step 7.
Attach nuts and washers to the threaded
shafts that are protruding from the wall.
Level the mount one more time and then
tighten the nuts. Do not overtighten the
wedge
anchors.
Threaded Shaft
Mounting Hardware
Wall Plate
Socket Wrench
Solid
Surfac
e
Cinder Block