Installation Instructions
Page 11
LPFM5080
To ensure optimal installation, this kit includes various screws of different diameters and lengths.
Mounting Bracket Installation
The number of mounting points will vary between manufacturers.
Select the spacer that is closest in depth to the recess to keep your bracket as close to the flat panel as possible.
Do NOT overtighten the screws.
Mounting Hardware
Universal Washer
Universal Spacer
Mounting Bracket
Mounting Point
Flat Panel
Step 1.
Place your flat panel screen-side down on a soft, flat surface, and identify the threaded mounting points that are located on the
back of the flat panel.
Step 2.
Determine the correct screw length by carefully inserting a straw or toothpick and mark the depth of the mounting point.
Step 3.
If your flat panel has a curved back or a recessed mounting point, a universal spacer must be used.
Step 4.
If needed, place the universal spacer between the mounting bracket and the flat panel.
Step 5.
Please use a universal washer with each screw for added stability (see Universal Washer Installation, below).
Step 6.
Attach each bracket to the flat panel by aligning the holes on each bracket with the threaded inserts on the back of your
flat panel. Secure the bracket to the flat panel by inserting a minimum of two (2) screws per bracket.
Do not overtighten the screws.
