GB-AVSTOR5
Page 12
Visit the Premier Mounts website at www.mounts.com
Installation Instructions
➊
Locate the pre-installed ceiling NPT adapter plate
inside the GB-AVSTOR5.
➋
Loosen the wingnuts.
➌
Slide the ceiling NPT adapter plate to the desired
position.
➍
Re-tighten the wingnuts.
Continue to
Securing the 1 ½˝ NPT Pipe to the GB-
AVSTOR5
below.
Ceiling NPT Adapter Plate Adjustment
View of the ceiling NPT
adapter plate inside the
GB-AVSTOR5
➊
Secure the 1 ½″ NPT pipe to the mounting coupler
and tighten the pipe.
➋
Use one (1) M5 x 6mm set screw to secure the pipe
to the plate.
The M5 x 6mm set screw must be used to
stabilize the 1 ½″ NPT pipe.
Go to
Securing the Lid
on page 13.
Securing the 1 ½˝ NPT Pipe to the GB-AVSTOR5
1 ½″
NPT pipe
Side view of the ceiling NPT
adapter plate inside the
GB-AVSTOR5
M5 x 6mm set screw
