GB-AVSTOR5
Page 10
Visit the Premier Mounts website at www.mounts.com
Installation Instructions
➊
Remove screws from around the desired electrical
knockouts (Figure 1) to detach their covers.
➋
Remove the knockout covers from the top of the
GB-AVSTOR5 (Figure 2).
Go to
Mounting Tray Installation
on page 11.
1- and 2-gang electrical knockouts
inside the GB-AVSTOR5
Figure 1
Figure 2
Detach the knockout
cover
If you no longer want to use a knockout, re-attach
its cover to prevent excessive airflow into the
ceiling.
WARNING!
Do not install or modify electrical wiring unless you
are a certified electrician.
➊
Remove two (2) M4 x 8mm Phillips combo screws to
detach the electrical box from the ceiling box
(Figure 1).
➋
Have a certified electrician do the following:
•
Punch out the appropriate power knockout(s) on the
side of the ceiling box (Figure 2).
•
Hook up all loose wiring in the electrical box.
•
Re-install the electrical box inside the ceiling box.
Continue to
Removing the Electrical Knockouts
(optional)
below.
M4 x 8mm Phillips
combo screw
Removing the Electrical Knockouts (optional)
Wiring the Electrical Box
Figure 1
Figure 2
Power Knockouts
Electrical box inside the
ceiling box shown