background image

CMF

Page 4 

Visit the Premier Mounts website at http://www.premiermounts.com

 

Installation Instructions

Features

Kickstand

 

Holds the flat-panel up to 4" from 

the wall, making it easy to connect 

A/V components from the back

Cable

Braided steel cable

Premier Mounts’ Low-Profile Cable Mount for Flat-Panels up to 55" (CMF) makes installing a flat-panel as simple 

as hanging a picture frame. The CMF’s slim design and patent-pending magnetically assisted installation feature, 

MagnaGuide®, makes it the ideal flat-panel accessory for fast and simple installations. This cable mount easily 

installs on a single stud and to hold flat-panel displays up to 55”, or up to 65 lbs with a 200 × 200mm to 600 × 400mm 

VESA mounting pattern.

Use the collapsible wall stand-off leg, included on one of the bottom flat-panel anchors, to prop up the flat-panel 

for easy A/V and power access. Add spacers, which are included with the cable mount kit, to align the display or to 

create more room between the display and wall.

MagnaGuide™

 

Simplifies flat-panel hanging 

by aligning the cable 

mounting plate and mount 

sliding plate together behind 

the display

Bolt Peg 

 

Connects cabling to the 

back of the display

Summary of Contents for CMF










Reviews: