background image

CMF

Page 2 

Visit the Premier Mounts website at http://www.premiermounts.com

 

Installation Instructions

Contact Premier Mounts with any questions: 
(800) 368-9700
[email protected]

Contents

Warning Statements

  PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS MUST BE READ AND 

COMPLETELY UNDERSTOOD. KEEP THESE INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION 

FOR FUTURE REFERENCE.

  PROPER INSTALLATION PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN MUST BE FOLLOWED, AS OUTLINED 

IN THESE INSTALLATION INSTRUCTIONS. FAILURE TO DO SO COULD RESULT IN PROPERTY DAMAGE, SERIOUS 

PERSONAL INJURY, OR EVEN DEATH.

  SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE ASSEMBLY OF THIS PRODUCT. USE 

PROPER SAFETY EQUIPMENT AND TOOLS FOR THE ASSEMBLY PROCEDURE TO PREVENT PERSONAL INJURY.

  PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS 

PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY 

UNAUTHORIZED ATTACHMENTS OR MODIFICATIONS, AND IS NOT RESPONSIBLE FOR ANY DAMAGES, CLAIMS, 

DEMANDS, SUITS, ACTIONS OR CAUSES OF ACTION OF WHATEVER KIND RESULTING FROM, ARISING OUT OF OR 

IN ANY MANNER RELATING TO ANY SUCH USE, ATTACHMENTS OR MODIFICATIONS.

  Be aware of the mounting environment. If drilling and/or cutting into the mounting surface, always make sure that there  

are no electrical wires in wall. Cutting or drilling into an electrical line may cause serious personal injury.

  Make sure there are no water or natural gas lines inside the wall where the mount is to be located. Cutting or drilling into a 

water or gas line may cause severe property damage or personal injury.

  This product is intended for indoor use only. Use of this product outdoors could lead to product failure and/or serious 

personal injury.

  Do not install near sources of high heat. Do not install on a structure that is prone to vibration, movement or chance of 

impact.

Weight Limit. ............................................................................................................................................................. 2

Warning Statements. ................................................................................................................................................ 2

Installation Tools. ...................................................................................................................................................... 3

Parts List................................................................................................................................................................... 3

Features. .................................................................................................................................................................. 4

Installing the Mount Sliding Plate to a Wood Stud. ................................................................................................... 5

Using the Kickstand. ................................................................................................................................................. 8

Technical Specifications.

 .......................................................................................................................................... 8

Warranty. .................................................................................................................................................................. 9

Weight Limit

Maximum Flat Panel Weight:  

65 lbs.

THE WALL STRUCTURE MUST BE CAPABLE OF 
SUPPORTING AT LEAST FIVE TIMES THE WEIGHT OF 
THE FLAT PANEL. IF NOT, THE WALL STRUCTURE MUST 
BE REINFORCED. 

Summary of Contents for CMF










Reviews: