APL-2647 Suspension Adapter
SINGLE WOOD
STUD
CEILING STRUCTURE
CEILING PLATE
(3) #14 X 2"
WOOD SCREWS
APL-2647
EXTENSION
SOLID STRUCTURE
CEILING
CEILING PLATE
APL-2647
EXTENSION
SUITABLE HARDWARE
(COMMERCIALLY AVAILABLE)
Figure 4
. Stud Installation
Bracket Installation
1.
Raise the projector with the mounting bracket attached.
2.
Fully insert the arrow design opening from the mounting bracket to the receiving tabs found on the
bottom plate of the Gyrolock
®
.
3.
Once the bracket is inserted, rotate the projector 180° and align the front arrow shaped slot from the
mounting bracket to the safety screw (Figure 5).
4.
The safety screw must go past the arrow-shaped slot below to prevent further rotation.
5.
Finger tighten the rest of the tension screws to stabilize the mounting bracket.
Installation Manual
Page 9