APL-2647 Suspension Adapter
Ceiling and Wall Installation
WARNING:
THE WALL OR CEILING STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LEAST FIVE
TIMES THE WEIGHT OF THE PROJECTOR. IF NOT, THE WALL OR CEILING WILL HAVE TO BE
REINFORCED. PROPER INSTALLATION PROCEDURES BY A QUALIFIED TECHNICIAN, AS
OUTLINED IN THE INSTALLATION INSTRUCTIONS, MUST BE ADHERED TO. FAILURE TO DO
SO COULD RESULT IN PERSONAL INJURY AND/OR DAMAGE TO THE PROJECTOR.
1.
Remove the middle extension from the Gyrolock by removing two of the M8 x 16 hex head screws,
washers and star washers from the top and bottom of the extension (Figure 1).
MIDDLE EXTENSION
CEILING PLATE
BELL HOUSING
M8 HEX HEAD SCREW
FLAT WASHER
STAR WASHER
M8 HEX HEAD SCREW
FLAT WASHER
STAR WASHER
(REMOVE)
Figure 1
. Extension Removal
Page 6
Installation Manual