17
www.pregiseu.com
A brand of
16-OM205-1
During the production of the coil the blue Coil Indicator will be illuminated.
Coil production can be stopped at any point during the winding process by pressing the
Stop button. This will immediately stop the pack being produced by the Packmaster™ pro
and will result in a smaller incomplete coil.
This may place the Coiler into a temporary ‘fault’ mode and the Coil Indicator will start to
flash denoting operator action is required to remove the coil. To exit the ‘fault’ mode remove
the coil and press the Home Button once. The Coil Indicator extinguishes and the machine is
ready to run again).
Press the Start Button . The Packmaster™ pro feeds the pack on to the Coiler load ramp
and the Coiler automatically produces a coil of the required length.
Operation
The red Power Indicator will be illuminated.
