3
SECTION 2 – OPERATION
2.1 General Operation Screen
The unit powers on with the last setting for run
length displayed. Run length is in time
(minutes:seconds) where the arrow keys are used to increase or decrease
1
.
Pressing Play starts the unit. While running, the timer counts down to
0:00 then stops. When stopped the display returns to the previously
entered run length. Pressing Play, while running, stops the unit and causes
it to return to the entered run length.
Pressing Up or Down arrow keys, increment or decrement the run time,
respectively.
Pressing Enter has no effect
Pressing Menu takes you to the Air Adjustment Screen (or the Temperature
Setting screen and then the Air Adjustment Screen if the Advanced Setup is
active see Section 3).
Pressing Play toggles the running state of the unit and returns to the General
Operation screen
2.1.1 Special operation for a run length of 0:00
A setting of 0:00 causes the unit to run continuously. The unit will start and
run until the stop button is pressed.
2.2 Setting Screens
Two settings, seal wire temperature (Temperature) and air inflation (Air
Adjustment), can be changed while the unit is running or stopped. The seal
wire temperature can be changed only by factory or field service personnel
while air inflation can also be changed by users.
1
Maximum is 20:00.
TIMER ADJUSTMENT
3:00
