AFV
+
Series High Power Programmable AC Power Supply
4-83
4.2
Control Software: GENERAL Mode
When entering the user interface of the control software, the GENERAL mode will
display first as below.
Figure 4.5 control software: GENERAL mode
The descriptions for the items and icons at the GENERAL mode are given as follows.
1)
Sets the output voltage by clicking or dragging the parameter bar.
2)
Sets the output frequency by clicking or dragging the parameter bar.
3)
Switches the function between three-phase synchronized or three-phase
independent adjustment (optional). The software will automatically detect if
this optional function is available.
4)
Switches the high/low level of output voltage. (When switching to High level,
the output current is only half of the output current when it’s at Low level.
5)
Turns on the output.
6)
Turns off the output.
7)
Resets the device output. When an error occurs, correct it first, and then reset
the protection.
8)
Displays the output measurement readings.
9)
Displays the simulated waveform preview of output settings.
10)
Switches the simulated waveform preview of three phases.
11)
Displays the waveform of output voltage.
8
1
9
3
2
11
12
13
14
10
17
4
5
6
7
15
16
18