Precor PVS Installation Manual Download Page 2

Edition Information

P/N 305262-101

Personal Viewing System (PVS) installation guide for the

P31 Console.

Copyright © 2019 Precor Incorporated. All rights reserved. Specifications subject to

change without notice.

Intellectual Property Notice

All rights, title, and interests in and to the software of the Preva Business Suite, the

accompanying printed materials, any copies of such software, and all data

collected via the Preva Business Suite, are exclusively owned by Precor or its

suppliers, as the case may be.

Precor is widely recognized for its innovative, award-winning designs of exercise

equipment. Precor aggressively seeks U.S. and foreign patents for both the

mechanical construction and the visual aspects of its product design. Any party

contemplating the use of Precor product designs is hereby forewarned that Precor

considers the unauthorized appropriation of its proprietary rights to be a very

serious matter. Precor will vigorously pursue all unauthorized appropriation of its

proprietary rights.

    Precor Incorporated

    20031 142nd Ave NE, P.O. Box 7202

    Woodinville, WA 98072-4002

1-800-347-4404

precor.com

Trademark Note

Precor, AMT, EFX, and Preva are registered trademarks of Precor Incorporated.

Other names in this document may be the trademarks or registered trademarks of

their respective owners.

Manufactured under license from Dolby Laboratories. Dolby

and the double-D symbol are trademarks of Dolby

Laboratories.

Important Safety Instructions

For safety and product information, see the Precor product documentation online

at Precor.com and the printed documentation that came with your Precor

equipment.

2

Summary of Contents for PVS





















Reviews: