Solana Assembly and Maintenance Guide
page 15
1
2
3
4
5
6
F.
Align one of the Height Extender holes with the
mounting hole for the Press Arm Release Spring.
Thread the Press Arm Release Spring (at the end
of the Press Arm Cable) into the Press Arm
Bracket.
CAUTION: Have someone hold the cable attached
to the Press Arm Release Spring away from the
following assembly. Cables pinched, crimped, or
damaged during assembly are not covered by the
warranty.
G. Attach the Support Bracket to the Main Upright
using
one ½-inch by 5¼-inch bolt
two washers
one locknut.
Wrench tighten.
Step 3. Assemble Press Arm, Continued
G
F
Press Arm Release
Spring
Height Extender
1 - ½" x 5¼" bolt
2 - washers
1 - locknut
Support
Bracket
Tighten at all
3 locations
F
G
Height Extender
Support Bracket
