General Information
The following information provides general equipment and service information that will help
you to use this manual to properly repair and maintain the treadmill.
Orientation
The equipment orientation (front, right, left, back) used in manual is referenced to a user stand-
ing on the equipment facing the console.
Tools
General set of service and repair tools.
l
US and Metric Hex Key set
l
Standard and Philips screw driver set
l
US SAE and Metric Wrench set
l
DVM Multimeter
l
Torque
1
wrench
l
Crank Puller (recommended Park Tool CCP-22)
l
US SAE and Metric socket set
l
Belt Tension Gauge (recommended Kent-Moore BT-33-73-
F)
l
Running belt tension gauge
(pn PPP00000002000710
1
Torque is a measure of the force that can cause an object to rotate about an axis. Bolt/nut
example: 5 nM torque is equivalent to 5 newtons of force applied one meter from the center of
the bolt, 6 ft-lb is equivalent to 6 lb of force applied 1 foot away from the center of the bolt.
Contact Precor Customer Support at [email protected] or 800.786.8404 with
any questions.
Page 5
2 General Information
Orientation
