Preco Electronics PreView Plus, Setup Manual

Page: 9 / 28

+1.866.977.7326 www.preco.com 3700042D
Copyright 2016
Page 4
On Screen Symbols:
This symbol indicates that the sensor associated with that camera is
powered and communicating with the monitor properly.
This symbol indicates object detection. This symbol will flash and
vary in count, size, and color depending on the proximity to the
object. Five of these symbols represent immediate proximity to an
object.
An arrow will appear in place of the symbol when an object is
detected to inform the operator which sensor is detecting by
pointing in the direction of the detecting sensor. The arrow will vary
in color relating to the proximity of the object being detected with
red representing closest proximity.
This icon will appear in the event of a PreView
®
radar sensor
reporting a BIST (Built In Self Test) error. If this icon appears, the
system is in need of repair.
This icon will appear in the event the monitor receives no
communication from any sensor. If this icon appears, the system is
in need of repair.
This icon will appear in the event of a communication error with a
single sensor in a multiple sensor application. If this icon appears,
the system is in need of repair.
This icon will appear in the event of a PreView
®
radar sensor
reporting a blockage error. If this icon appears, the sensor needs to
be cleaned off.
If any of the above error icons are present PRECO Electronics
®
recommends
ceasing operation of the vehicle until the object detection system is repaired.