PD6830 Pulse Input Rate/Totalizer Instruction
Manual
36
Setting the Tag Display (
tag
)
The meter can be set to display a combination of seven alphanumeric characters for
engineering units (e.g.
GALLONS
); for identification (e.g.
TANK
3
); or for dual rate/total
units (e.g.
GPS/GAL
,
LPM/LTR,
,
BPH/BBL
). Press Right arrow to select next character
and Up arrow to increment character.
To automatically cycle the lower display between total reading for ten seconds
and tag for two seconds, choose
togle
.
To disable the tag display and show only total reading uninterrupted on the
lower display, choose
Off.
To show tag only on the lower display, choose
On.
Totalizing continues in the
background, but is not shown while
On
is selected.
Selecting
On
or
togle
prompts for entry of the tag.
The unit being changed blinks.
Press the Enter/ACK button, at any time, to accept a setting or Menu button to exit
without saving changes.
tag
SeTUP
ON
TAG
TAG
A
BCDEFG
OFF
TAG
TAG
A
B
CDEFG
TAG
ACCDEFG
togle
TAG
Summary of Contents for ProtEX-RTP PD6830
Page 55: ...PD6830 Pulse Input Rate Totalizer Instruction Manual 55...
Page 57: ...PD6830 Pulse Input Rate Totalizer Instruction Manual 57 NOTES...
Page 58: ...PD6830 Pulse Input Rate Totalizer Instruction Manual 58 NOTES...
Page 59: ...PD6830 Pulse Input Rate Totalizer Instruction Manual 59 NOTES...
