manualshive.com logo in svg

Precision Digital Corporation Survivor PD662, Instruction Manual

Share
Download
Precision Digital Corporation Survivor PD662 Instruction Manual Download Page 9

PD662 Loop-Powered Meter 

    Instruction Manual 

9

 

SAFETY INFORMATION 

 

 

CAUTION

: Read complete 

instructions prior to installation 
and operation of the meter. 

 
The equipment shall be installed by qualified personnel in accordance 
with applicable local and national regulations (e.g. CEC, NEC, FCC, 
SCC, etc). 

Follow all safety and operation guidelines in this manual. If the meter is 
used in a manner not recommended by the manufacturer, the overall 
safety will be impaired.  

Installation and service should be performed only by trained service 
personnel. 

This unit is not suitable for hazardous locations such as potentially 
explosive zones or locations. 

No user replaceable part inside. All service shall be performed at the 
factory. 

Do not disconnect and reconnect cables during a lightning storm. 

Suitable surge suppressor (e.g. lightning protection) shall be provided in 
end application installation. 

INSTALLATION 

All pushbuttons and wiring connectors are accessed by 
opening the NEMA 4X enclosure by removing the 4 captive 
screws that secure the cover. 

Unpacking 

Remove the meter from box. Inspect the packaging and 
contents for damage. Report damages, if any, to the carrier. 
If any part is missing or the meter malfunctions, please contact 
your supplier or the factory for assistance. 

!

Summary of Contents for Survivor PD662



































Reviews:

No comments

Brands by name

Popular brands

Load more brands