PD662 Loop-Powered Meter
Instruction Manual
25
Maximum & Minimum Readings (
HI
&
LO
)
The maximum and minimum (peak & valley) readings reached by the
process are stored in the meter since the last reset or power-up. The
meter flashes
HI
or
LO
to differentiate between run mode and max/min
display.
Press
Up
to Display and to
Toggle Between Max & Min
10 Sec Time Out
16.62
Run Mode
HI
LO
ENTER
MENU
Press
Enter
to hold Max/Min
Press
Right
to Reset Max/Min
Press
Menu
to Exit Max/Min
19.45
5.34
1. Press
Up
arrow button to display maximum reading since the last
reset/power-up.
2. Press
Up
arrow again to display the minimum reading since the last
reset/power-up.
3. Press
Enter
to continue to display the Max or Min display reading
by disabling the Max/Min timeout. The meter will continue to track
new Max/Min readings. Press MENU to exit the Max/Min reading.
4. If
Enter
is not pressed, the Max/Min display reading will continue to
flash and time out after ten seconds. The meter will return to
display the actual reading.
5. Press
Right
arrow button while in Max/Min Mode to reset both Max
and Min. Max/Min display readings are reset to the current reading.
