Precision Digital Corporation Survivor PD662 Instruction Manual Download Page 4

Page: 4 / 34

PD662 Loop-Powered Meter

Instruction Manual

Table of Contents

INTRODUCTION ------------------------------------------------------------ 3

ORDERING INFORMATION --------------------------------------------- 3

SPECIFICATIONS ---------------------------------------------------------- 6

General ------------------------------------------------------------------------------- 6

Input ----------------------------------------------------------------------------------- 7

Heater --------------------------------------------------------------------------------- 7

COMPLIANCE INFORMATION ----------------------------------------- 8

Safety --------------------------------------------------------------------------------- 8

Electromagnetic Compatibility ----------------------------------------------- 8

SAFETY INFORMATION ------------------------------------------------- 9

INSTALLATION ------------------------------------------------------------- 9

Unpacking --------------------------------------------------------------------------- 9

Mounting -------------------------------------------------------------------------- 10

PD662 Connections ------------------------------------------------------------ 10

Connection & Wiring Diagrams ------------------------------------------- 11

SETUP AND PROGRAMMING ---------------------------------------- 13

Front Panel Buttons ----------------------------------------------------------- 14

Setting Numeric Values ------------------------------------------------------ 15

Programming the Meter ------------------------------------------------------ 15

Main Menu ------------------------------------------------------------------------ 16

Main Menu Display Functions & Messages ---------------------------- 17

Setting the Decimal Point (

) -------------------------------------------- 17

Scaling the Meter (

SCL

) ----------------------------------------------------- 18

Calibrating the Meter (

Cal

) ------------------------------------------------- 19

Recalibrating the Internal Calibration Reference (

Ical

) ------------ 19

Advanced Features Menu ---------------------------------------------------- 20

Advanced Features Menu & Display Messages ---------------------- 21

Signal Input Conditioning Function (

Fnc

) ------------------------------- 22

Information Menu (

info

) ---------------------------------------------------- 22

Input Signal Filter (

FIL

) ----------------------------------------------------- 22

Internal Calibration (

ICal

) -------------------------------------------------- 23

OPERATION ---------------------------------------------------------------- 24

Front Panel Buttons Operation -------------------------------------------- 24

Maximum & Minimum Readings (

) ----------------------------- 25

Reset Meter to Factory Defaults ------------------------------------------- 26

Heater Operation ---------------------------------------------------------------- 26

Factory Defaults & User Settings ----------------------------------------- 27

Summary of Contents for Survivor PD662



































Search results

Summary of Contents for Survivor PD662

Reviews:

Brands by name

Popular brands

Precision Digital Corporation Survivor PD662, Instruction Manual

Search results

Summary of Contents for Survivor PD662

Reviews:

Brands by name

Popular brands