Precision Digital Corporation SuperNova PD500, Instruction Manual, Page: 29 / 62

SuperNova PD500 PID Process & Temperature Controllers
Instruction Manual
29
G.OUT Parameter Details
Parameter Setting Range Unit
Default
Value
Parameter Display Condition
CNT1 ONOF, PID PID
CNT2 NONE, ONOF, PID NONE
O.ACT REV, DIR REV
OUT2 control mode CNT2 is set
to NONE
CP 1 - 1000 s
Time
(seconds)
RLY : 20
SSR : 2
OUT1 option is RLY or SSR and
OUT1 control mode CNT1 is set
to PID.
CPC 1 - 1000 s
Time
(seconds)
20
OUT2 control mode CNT2 is set
to PID.
HYS EUS (0.0 - 100.0) % Note 1 1
OUT1 control mode CNT1 is set
to ONOF.
HYSC EUS (0.0 - 100.0) % Note 1 1
OUT2 control mode CNT2 is set
to ONOF.
EO
(-5.0 - 105.0) % (Note 2)
(0.0 - 105.0) % (Note 3)
% 0.0
EOC (0.0~105.0) % % 0.0
OUT2 control mode CNT2 is set
to ONOF or PID.
OL-H
(-5.0 - 105.0) % (Note 2)
(0.0 - 105.0) % (Note 3)
(However, OL-L < OL-H)
% 100.0
OUT1 control mode CNT1 is set
to PID.
OL-L
(-5.0~105.0) % (Note 2)
(0.0~105.0) % (Note 3)
(However, OL-L < OL-H)
% 0.0
OUT1 control mode CNT1 or
OUT2 control mode is set to PID.
1. Set by G.IN parameter UNIT.
2. Selections when thermocouple or RTD input type selected.
3. Selections when mA, VDC, or MVDC input type selected.