P
RO
V
U
™ PD6001 Analog Input Feet & Inches Meter
Instruction Manual
23
Setting Numeric Values
The numeric values on PV1 (main display) are set
using the Right and Up arrow buttons. Press Right
arrow to select next digit and Up arrow to increment
digit value.
The digit being changed is displayed brighter than the
rest. The leading zero in any of the unit designations
is omitted. Because of this, if the leading zero of any
unit designation is the currently selected unit, none of
the digits will be brighter than any other. Pressing the
Up arrow will increment the value to 1.
The range of numeric values for each unit designation
is from 0-99 for feet, 0-11 for inches and either 0-7 or
0-15 for fractional inches depending on whether the
desired display is in eighths (
1
/
8
) or sixteenths (
1
/
16
)
mode.
Press and hold up arrow to auto-increment the display
value.
Press the Enter button, at any time, to accept a
setting or Menu button to exit without saving changes.
Setting Up the Meter (
setup
)
The
Setup
menu is used to select:
1. Input signal the meter will accept
2. Dual-scale feature for some level
applications
3. Select the display units/tags
4. Decimal point position
5. Programming Menu
6. Display parameter and intensity
7. Relay operation
8. 4-20 mA analog output scaling
Press the Enter button to access any menu or press
Up arrow button to scroll through choices. Press the
Menu button to exit at any time.
