P
RO
V
U
™ PD6001 Analog Input Feet & Inches Meter
Instruction Manual
22
Display Functions & Messages
Display
Parameter
Action/Setting
Description
DeLAY
Delay
Enter relay
Time Delay
menu
DLY 1
Delay 1
Enter relay 1 time delay
setup
On 1
On 1
Set relay 1 On time delay
OFF 1
Off 1
Set relay 1 Off time delay
DLY 2
Delay 2
Enter relays 2-8 time delay
setup
break
Loop break
Set relay condition if loop
break detected
Break1
*
Loop
break 1*
Set relay 1 (*through 8)
condition if loop break
detected
Note: Relays 5-8 are
shown only if expansion
relay module is installed.
Only relays 1-4 are
available in the base
model.
ignore
Ignore
Ignore loop break condition
(Processed as a low signal
condition)
On
On
Relay goes to alarm
condition when loop break
is detected
Off
Off
Relay goes to non-alarm
condition when loop break
is detected
Aout
Analog
output
Enter the
Analog output
scaling menu
Dis 1
Display 1
Program display 1 value
Out 1
Output 1
Program output 1 value
(e.g. 4.000 mA)
Dis 2
Display 2
Program display 2 value
Out 2
Output 2
Program output 2 value
(e.g. 20.000 mA)
reset
Reset
Press Enter to access the
Reset
menu
Rst Hi
Reset high
Press Enter to reset max
display
Rst Lo
Reset low
Press Enter to reset min
display
Rst HL
Reset
high & low
Press Enter to reset max &
min displays
Contrl
Control
Enter
Control
menu
Auto
Automatic
Press Enter to set meter for
automatic operation
nmAn
Manual
Press Enter to manually
control relays or analog
output operation
pass
Password
Enter the
Password
menu
Pass 1
Password 1
Set or enter Password 1
Pass 2
Password 2
Set or enter Password 2
Pass 3
Password 3
Set or enter Password 3
Display Functions & Messages
Display
Parameter
Action/Setting
Description
unloc
Unlocked
Program password to lock
meter
locd
Locked
Enter password to unlock
meter
999999
-99999
Flashing
Over/under range condition
Main Menu
The main menu consists of the most commonly used
functions:
Setup
,
Reset, Control,
and
Password
.
•
Press Menu button to enter Programming Mode
then press the Up arrow button to scroll main
menu.
•
Press Menu, at any time, to exit and return to
Run Mode. Changes made to settings prior to
pressing Enter are not saved.
•
Changes to the settings are saved to memory
only after pressing Enter/F3.
•
The display moves to the next menu every time a
setting is accepted by pressing Enter/F3.
