PD8-6300 Pulse Input Rate/Totalizer, Counter & Tachometer
Instruction Manual
48
Scaling the 4-20 mA Analog
Output (
Aout
)
The 4-20 mA analog output can be scaled to provide
a 4-20 mA signal for any display range selected.
No equipment is needed to scale the analog output;
simply program the display values to the
corresponding mA output signal.
The
Analog Output
menu is used to program the
4-20 mA output based on display values.
on
Reset Menu (
reset
)
The
Reset
menu is used to reset the totals, maximum
or minimum reading (peak or valley) reached by the
process; both may be reset at the same time by
selecting “reset high & low” (
rst HL
).
Manual Control Menu (
Contrl
)
The
Manual Control
menu is used to control the
4-20 mA analog output and the relays manually,
ignoring the input. Each relay and analog output can
be programmed independently for manual control.
Selecting automatic control sets all relays and the
analog output for automatic operation.
Summary of Contents for ProtEX-MAX PD8-6300
Page 2: ...2 ...
Page 62: ...PD8 6300 Pulse Input Rate Totalizer Counter Tachometer Instruction Manual 62 NOTES ...
Page 63: ......
