PD8-6300 Pulse Input Rate/Totalizer, Counter & Tachometer
Instruction Manual
40
Setting the Display Parameter &
Intensity (
dsplay
)
Display line 1 (
line 1
) can be programmed to
display:
1. Rate value
2. Total or grand total
3. Relay set points
4. Max & min values
5. Modbus input
6. Display rate and units
7. Rate and total
8. Rate and grand total
9. Total and units
10. Grand total and units
Display line 2 (
Line 2
) can be programmed to
display:
1. Rate value
2. Total or grand total
3. Relay set points
4. Max & min values
5. Engineering units or custom legends
6. Modbus input
7. Off (no display)
8. Display rate and units
9. Rate and total
10. Rate and grand total
11. Total and units
12. Grand total and units
After setting up the input and the display, press the
Menu button to exit programming and skip the rest of
the setup menu. Press the Menu button again and the
Up arrow to reach the
Program
menu and complete
the scaling or calibration of the meter.
Display Flow Rate, Total or Grand
Total
Line 1 can be programmed to display flow rate, total,
or grand total, and line 2 can be programmed to
display flow rate, total, grand total, engineering units,
custom legends, or be turned off. Both lines can also
display relay set points, or max and min values.
Flow Rate Indicator
Flow Totalizer
Rate & Total
Total & Grand Total
Display Toggling Between Reading
& Units
The PD8-6300 can be programmed so that line 1 and
line 2 toggle between the reading and their
engineering units. For instance, line 1 displays flow
rate, line 2 displays total, and the display toggles to
show their units.
Display Intensity (
d-Inty
)
The meter has eight display intensity levels to give the
best performance under various lighting conditions.
Select intensity 8 for outdoor applications. The default
intensity is 6.
Summary of Contents for ProtEX-MAX PD8-6300
Page 2: ...2 ...
Page 62: ...PD8 6300 Pulse Input Rate Totalizer Counter Tachometer Instruction Manual 62 NOTES ...
Page 63: ......
