Precision Digital Corporation PD6928, Instruction Manual

Page: 19 / 80

PD6928 Loop-Powered Flow Rate/Totalizer Instruction Manual
19
Installation
To access the connectors, remove the enclosure
cover and unclip the display module by pulling it from
the enclosure. The display module may be
disconnected from the options module to facilitate
wiring to the options module.
Unpacking
Remove the meter from box. Inspect the packaging
and contents for damage. Report damages, if any,
to the carrier.
If any part is missing or the meter malfunctions,
please contact your supplier or the factory for
assistance.
Conduit Plugs Included
The PD6928 is supplied with two plastic conduit plugs
for installations that do not require the use of all three
conduit entries.
Mounting
The PD6928 has a slotted mounting flange that may
be used for pipe mounting or wall mounting.
Alternatively, the unit may be supported by the
conduit using the conduit holes provided. Refer to
Figure 1 and Figure 2 .
•
Do not attempt to loosen or remove flange bolts
while the meter is in service.
Dimensions
All units: inches [mm]
Figure 1. Enclosure Dimensions
– Front View
Figure 2. Enclosure Dimensions
– Side View
Figure 3. Enclosure Dimensions
– Top View
5.25" (133 mm)
3.35" (85.1 mm)
2.25"
(57.2 mm)
0.32"
(8.2 mm)
5.65"
(144 mm)
4.18"
(106 mm)