PD6928 Loop-Powered Flow Rate/Totalizer
Instruction Manual
18
Compliance Information
Electromagnetic Compatibility
EMC Emissions
•
CFR 47 FCC Part 15 Subpart B Class A
emissions requirements (USA)
•
ICES-003 Information Technology
emissions requirements (Canada)
•
AS/NZS CISPR 11 Group 1 Class A
ISM emissions requirements
(Australia/New Zealand)
•
EN 55011 Group 1 Class A ISM
emissions requirements (EU)
•
EN 61000-6-4 Emissions requirements
for Heavy Industrial Environments -
Generic
EMC Emissions
and Immunity
EN 61326-1 EMC requirements for
Electrical equipment for measurement,
control, and laboratory use
– industrial use
EU Declaration of
Conformity
For shipments to the EU and UK, a Declaration of
Conformity was printed and included with the product.
For reference, a Declaration of Conformity is also
available on our website
Safety Information
•
Read complete instructions prior to installation
and operation of the meter.
•
Hazardous voltages exist within enclosure.
Installation and service should be performed only
by trained service personnel.
•
Service requiring replacement of internal
components must be performed at the factory.
•
Control room equipment must not use or
generate more than 250 VRMS or VDC.
•
PD6928 Series Loop-Powered meters do not add
capacitance or inductance to the loop under
normal or fault conditions.
•
Equipment contains non-metallic materials and
therefore special care and consideration should
be made to the performance of these materials
with respect to chemicals which may be present
in a harsh operating environment.
