PD2-6060
Helios Large Display Dual-Input Meter Instruction Manual
31
Calibrating the Meter with External Source (
Cal
)
Note:
To scale the meter without a
signal source refer to Scaling the Meter
without a Signal Source, page 30.
Warm up the meter for at least 15
minutes before performing calibration to
ensure specified accuracy.
The meter can be calibrated to display the process variable in engineering units by applying the
appropriate input signal and following the calibration procedure.
The use of a calibrated signal source is strongly recommended to calibrate the meter.
Calibrating the Meter for Channel A (
CAL-A
)
Calibrating the Meter for Channel B (
CAL-B
)
www.
GlobalTestSupply
.com
Find Quality Products Online at:
